China labeling machine manufacturer — OEM/ODM, semi-automatic to high-speed rotary systems.

sales@hipaks.com WhatsApp: +86 186 1602 0558
Get a Quote

Bottle Labeling Machines for Every Shape You Ship

Round, square, oval, flat and tapered, matched to your bottle diameter, label size and line speed.

Get a Quote
From $600
Semi-automatic tabletop
To $15,000
Fully automatic builds
φ10–150 mm
Round-bottle range on benchtop T801
15–300 pcs/min
Speed span across the range

Choose Your Bottle Shape

Pick your shape: each card routes to the platforms that hold that bottle.

Round bottles wrap-around labeled on an automatic labeling machine

Round

Wrap-around on benchtop T801 (φ10–150mm) or automatic T921 (φ25–100mm, 40–120 pcs/min); positioning on T922/T922R for fixed-point alignment.

Route: T921 / T922 automatic · T801 semi-auto

See Pricing →

Oval bottles labeled front and back on a roller labeling platform

Oval

Flat-oval faces are front-and-back territory: T803 roller (semi-auto) or the T963 combo (automatic).

Route: T803 semi-auto · T963 combo

See Pricing →

Horizontal labeling machine for small vials and slim round bottles

Small φ10–30 (Vial / E-liquid)

Too slim to stand at speed: the T923 horizontal platform lays them down and labels up to 300 pcs/min.

Route: T923 horizontal

See Pricing →

HiPaks factory test bench where your bottle gets a free 48-hour test-run video

Not sure?

Send the bottle; the 48-hour test video answers shape questions faster than any spec sheet.

Route: free test-run

See Pricing →

Get a Quote

Bottle Labeling Machine Models

The most-specified bottle labelers across our semi-automatic and automatic lines, with real datasheet numbers.

T803 front and back roller labeler for oval and flat bottles

T803 · Front & Back Roller

Front and back labels on oval and flat bottles, with SICK transparent-label sensing built in.

From $600

See Pricing →

Get an Exact Quote

The Wrap-Around Formula: Bottle Circumference × Label Length × Roller Wrap Angle

Wrap-around labeling is geometry before it is machinery. A round bottle of diameter D offers a circumference of π × D; a 60mm bottle gives roughly 188mm of travel. Your label length decides how much of that circle the label covers, and the roller system decides how smoothly the bottle rotates through that arc while the label is pressed home.

Circumference = π × diameter  →  φ60mm bottle ≈ 188 mm of wrap travel

Three practical consequences fall out of that arithmetic. First, label length that exceeds what the rollers can press through the wrap angle invites a trapped-air bubble: the tail lifts. Second, the label must start and end on a straight-wall zone; on shoulders and tapers the circumference changes under the label, which is why tapered bottles need jigs. Third, label height must fit inside the straight wall too: a 90mm-tall label on an 80mm straight wall will wrinkle at the shoulder every time.

You don’t need to do this math: send us the bottle and the label and the test video settles it. But knowing the formula tells you why a machine that handles φ10–150mm (T801) is specified by diameter range, not by “bottle type” alone.

Roller wrap station rotating a round bottle through the label application arc
The roller wrap carries each bottle through the wrap arc while the label is pressed home: geometry, not luck.
Get a Quote

Fixing the 3 Classic Round-Bottle Problems

1 · Bottle slip on smooth PET

Glossy PET and glass give the roller nothing to grip: the bottle skids, the label lands short and the seam wanders. The countermeasures are mechanical, not software: roller pressure matched to container weight, grip surfaces that bite without marking, and speed ramps that accelerate the bottle into the wrap instead of shocking it. This is exactly what the FAT run on your bottles is for: slip shows up on video in the first minute.

2 · Wrinkles on small diameters

On a φ20mm vial the label curves tightly: a long, stiff label bridges across the curve and wrinkles like a ruffled skirt. The fix is upstream of the machine: shorter labels, taller-thinner formats, or a horizontal platform like the T923 that rolls the vial through with controlled pressure. Label material stiffness matters as much as length; we match both during engineering evaluation.

3 · Tapered bottles

A taper changes circumference from bottom to top, so any full wrap must either stretch (it won’t) or wrinkle (it will). The honest answers are a shorter front-face label inside the straight zone, or an engineered jig that presents each bottle at a controlled angle. We build both: start at custom labeling solutions and read the tapered bottle guide for the full decision tree.

Close-up of labeling on small-diameter vials where slip and wrinkle defects appear

See the defects, then the fix

Before/after test footage for slip and wrinkle cases is archived per model.

On film in the test-run library
See Test Videos

Compare Bottle Labeling Models

ModelBottle typeAccuracySpeedBottle range (mm)Label L × W (mm)Price
T801 · semi-auto benchtopRound φ10–150±0.5mm20–30 pcs/minφ10–150 × H 20–300L 20–300 × W 20–230From $600
T803 · semi-auto rollerOval / flat, front & back±0.5mm20–30 pcs/minL 20–120 × W 20–180 × H 0.2–75L 15–300 × W 15–130From $600
T805 · semi-auto full wrapSquare / flat±0.5mm15–30 pcs/minL 20–200 × W 20–150 × H 5–120L 15–200 × W 20–150From $600
T921 · automatic wrapRound φ25–100±1mm40–120 pcs/minφ25–100 × H 25–300L 20–300 × W 20–100From $6,000
T923 · automatic horizontalRound φ10–30±1mm100–300 pcs/minφ10–30 × H 15–110L 20–300 × W 20–120From $6,000
T962 · automatic double sideSquare / flat±1mm60–120 pcs/minL 20–300 × W 30–100 × H 60–360L 20–300 × W 20–175From $6,000
Get an Exact Quote

What to Consider Before Buying

Bottle diameter & height range

Check today’s bottle and next year’s. The benchtop T801 spans φ10–150 × H 20–300mm; deliberately wide, because SKU creep is the rule, not the exception. Automatic platforms are narrower per model (T921: φ25–100; T923: φ10–30), so line-level buyers should map every current SKU against the range before choosing.

Label width vs bottle straight-wall zone

The label can only live where the wall is straight and the circumference is constant. Measure your straight-wall zone honestly (including how much is eaten by embossing, shrink marks and handle bosses) and keep label height inside it with margin.

Speed & accuracy at speed

Rated 15–300 pcs/min means little without the working condition. We quote accuracy at your target speed with your container (±0.5mm benchtop, ±1mm automatic) and prove it in the FAT video before you pay the balance.

Transparent label sensor

Clear-on-clear labels need special sensing (SICK special sensors, fitted where the label spec calls for them). Declare transparent labels at inquiry: discovering it after delivery costs a sensor retrofit, not just a setting.

Changeover between SKUs

Ask what a size change physically involves: scaled adjustments and pin swaps (ours) versus shims and hex keys (some). A 20-minute changeover on a 5-SKU line is a part-time job nobody applied for.

Line integration

For automatic units we need conveyor height, travel direction and footprint. No room for a full machine? The labeling heads mount onto the conveyor you already run, see the retrofit guide.

High-precision flat labeling head placing a small label during a factory accuracy test
Accuracy is quoted at your speed on your bottle, then proven on camera in the FAT video before you pay the balance.
Get a Quote

Watch Bottles Get Labeled: By Real Diameter, Real Label

5test clips of this machine class 250clips in our library
T923 horizontal on oral liquid vialsPharmaceutical line · customer site TEST RUN
T962 double-side on shampoo bottlesPersonal care line · front & back in one pass ON-SITE
MT-805 wrap-around on wide-arc body wash bottlesSemi-automatic station · factory test TEST RUN
T962 double-side on dairy milk bottlesDairy line · customer site ON-SITE
T923 horizontal on sampling test vialsDiagnostics vials · factory run FACTORY

Browse All Test Videos

Wine, Beer, Water, Sauce, Honey & More

Food and beverage bottles labeled at line speed on HiPaks labeling systems

Wine & brewery

Front-and-back body labels plus neck labels on MT-190e platforms; high-speed wrap for beer and water. Beverage, wine & brewery →

Food & sauces

Hot sauce, honey, condiments: round and tapered formats, net-content panel placement kept inspector-ready. Food & beverage →

Cosmetics & personal care

Straight-wall cosmetic bottles, flat shampoo geometry, clear-on-clear labels. Cosmetics →

Get a Quote

Bottle Labeling Machine: Frequently Asked Questions

How much does a bottle labeling machine cost?

Semi-automatic bottle labelers start from $600; fully automatic models run to $15,000 depending on platform, speed and conveyor integration. The price center explains what drives each tier, and a firm quote follows the test run.

What bottle sizes can your machines handle?

The benchtop T801 covers φ10–150mm diameter and 20–300mm height on one machine. Automatic platforms are model-specific: T921 handles φ25–100 × H 25–300mm; T923 horizontal covers φ10–30 × H 15–110mm; T962 takes containers up to L 300 × W 100 × H 360mm. Send all your SKUs’ dimensions and we map them before quoting.

Can one machine do front and back labels on square bottles?

Yes. The semi-automatic MT-860 and the automatic T962 apply both labels in a single pass. Square-bottle geometry has its own engineering challenges (corner wrinkles, diagonal label climb) covered in depth on the double-side labeling machine page.

Can you label tapered (woozy) bottles?

Yes, with engineered jigs. A taper changes circumference along the label path, so we either shorten the label into the straight zone or build a fixture that presents the bottle at a controlled angle. The full approach is in the tapered bottle labeling guide, and the jigs are archived for reorders.

Will it work with clear bottles and transparent labels?

Yes, provided the sensor matches the label. Transparent labels are invisible to standard sensors, so we fit special SICK sensors on the relevant platforms; for example the T803 is specified for transparent-label detection. Declare clear-on-clear at inquiry and we prove it in the test video.

What accuracy at my line speed?

Specified accuracies are ±0.5mm on the semi-automatic range (±0.2mm on the T807 flat-surface model) and ±1mm on automatic platforms, quoted against your working condition: your container, label and target speed. We demonstrate accuracy at speed in the FAT video before shipment.

Do you have a machine for wine bottles with front and back labels?

Yes: the MT-190e/190 applies front and back labels on round bottles including wine bottles at benchtop scale, and the T803 roller platform covers oval and flat formats. For higher volumes, the T962 double-side platform runs 60–120 pcs/min. See beverage, wine & brewery for line layouts.

Can I see my own bottles labeled before buying?

That is our standard process, not a special favor: send bottles and labels, and you receive a test-run video within 48 hours of our engineering evaluation. The same footage becomes your FAT evidence before the 70% balance; details in FAT & quality.

Your Bottles, Tested Before You Pay the Balance

30% deposit starts the build; the FAT video of your own bottles at your own speed releases the shipment. The 10-point checklist: FAT & quality process.

Book a Live Video FAT
Back to top